Eventide H90 Harmonizer, User Manual

Page: 23 / 176

Fig. 3.5
Guitar and Vocals with MixingLink
Con fi gure your H90’s Global Routing Con fi guration (Section 7.1) to use Dual Routing from the
System Menu.
Connect your guitar to H90 Input 1.
Connect H90 Output 1 to your guitar amp.
Connect your microphone to the MixingLink mic input.
Connect MixingLink Line Output to a monitor input, such as a mixing console.
Connect MixingLink ‘To FX’ Output to H90 Input 3.
Connect H90 Output 3 to MixingLink ‘From FX’ Input.
Press the Routing Button and turn Quick Knob 1 to adjust the routing position to Pre/Post. This
enables Preset A to be on Path 1 and Preset B to be on Path 2. Now we can use Preset A to process
our guitar signal into the guitar amp, and Preset B to process the microphone signal into a different
input source.
Check out Dual Routing (Section 6.2.2) for more info.
3.5. Pre/Post Ampli fi er
If your guitar amp has an effects loop, it is sometimes desirable to put certain effects such as drive or
compression before the preamp, and other effects such as delay and reverb after the preamp. This can be
referred to as a Pre/Post setup, or the four-cable method (4CM).
Dual Routing allows you to setup a variety of Programs that use different routing con fi gurations with your
favorite effects at different positions of your amp’s signal path.
•
•
•
•
•
•
•
•
•
3. SETUP
23