manualshive.com logo in svg

Eventide DIR911, Quick Reference Manual

Share
Download
Eventide DIR911 Quick Reference Manual Download Page 23

©2000 Eventide Inc. 

DIR911 Instant Recall Recorder 

 

17 

CHANGING SECURITY LEVEL Screen

 - 

Change the security level 

 

 
There are two levels of security available in the DIR911: HIGH and LOW. If the DIR911 
is set to low security, there is no password protection. If it is set to high security, you can 
only edit the DIR911 configuration information by entering your password. High security 
is most useful when only one person (e.g., a supervisor) should have access to the 
DIR911 configuration and operators are not permitted to change any settings. High 
security is the factory default setting. 

 
 
CONFIG 3 Screen

 - 

Configure Serial Input/Output, ANI and ALI configuration,  field 

firmware upgrade, select Traffic (light or heavy), and Autorestore time.

 

 
 

 
Press “SERIAL I/O” and jump into the configuration screen. Press “TRAFFIC” to select 
LIGHT or HEAVY traffic(default is LIGHT). Press AUTORESTORE to change timing on 
Autorestore feature (default is 0.25 seconds).. Press “DONE” when DIR911 
configuration is complete. 

 
 

CONFIGURE IO Screen 

 

 

 
Press “CONFIG” to set up the serial IO communication rates for all four serial ports. 
“MORE” leads to the ANI/ALI, field upgrade menu and “DONE” leaves the IO 
configuration screens. 
 
 

PORT CONFIG Screen

 - 

Configure Serial Input/Output Port 

 

 

                     

Current Security Level: HIGH SECURITY 

                       
     CHANGE                                                          DONE  

                     

DIR911 System Configuration 

                         
  SERIAL I/O   TRAFFIC     AUTORESTORE      DONE   

                     

Configure IO port, Serial data info 

                     
   CONFIG                                         MORE         DONE   

External Time Sync IO Port (RS-485) 

Rate:19200     Parity:None    Data:8     Stop:1 

Port A     Out+ P8     Out- P9     In+ P6     In- P7 

     PORT        CURSOR          CHANGE           DONE   

Summary of Contents for DIR911




































Reviews:

No comments

Brands by name

Popular brands

Load more brands