DIR911 Instant Recall Recorder
©2000 Eventide Inc.
16
Here you can see how many calls have been received by this particular DIR911 since
the unit was powered on or since the last call counter reset, whichever is the more
recent. This feature can be used to analyze the activity of a given operator over a period
of time, to check the number of calls a given location makes and receives in a given
day, etc.
By pressing “RESET CNT,” you will reset the call counter to 0 and start it up again.
Security Configuration
The following screens are used when setting up the security in the DIR911. Security can
be set to a high level, under which all configuration menus are password-protected.
Factory default is “high,” default password is 00000.
SECURITY Screen
-
Leads to changing password/security level
From this screen, you can change your password and the security level of the unit.
CHANGING THE PASSWORD Screen
-
Change your current password
If you wish to change your security password, then enter the screen above by pressing
“CHANGE PWD” in the SECURITY screen. The factory default password is 00000,
which displays automatically. Press DONE.
The next screen asks for your new password. Enter your new password by moving from
digit to digit with the cursor and using DECREASE/INCREASE on each digit. Press
DONE when your new password is complete.
The next screen asks you to verify this new password by entering it again. Enter as
above, and press DONE. The unit will notify you if the password change has been
successful or if there was an error. If an error occurs, simply enter the current valid
password and follow the procedure again.
DIR911 Security Configuration
CHANGE PWD LEVEL DONE
Please enter your current password:
00000
CURSOR DECREASE INCREASE DONE
