Appendix B Extended Remote Control
Page 36
Appendix B Extended Remote Control
BD600+ Profanity Delay
Document Version 2.1
DELAYED RS232
INPUT
OUTPUT
REMOTE CONTROL
ACTIVITY
WORD
CLOCK
IN
OUT
POWER
RS232
CONTROL
100-240V AC 50-60Hz 45W
REMOVE POWER BEFORE OPENING.
NO USER-SERVICEABLE PARTS INSIDE.
OUT - AES/EBU - IN
CH2 - ANALOG OUT - CH1
CH2 - ANALOG IN - CH1
USB
The with the Extended Remote Control feature has 16 configurable parallel inputs and 16
configurable parallel outputs, as well as an RS232 (serial) delay input and output.
Extended Remote Connectors
The extended remote connectors are DB25 for parallel input and output, and DB9 for serial input and
output. See Appendix E for connection and electrical information.
Parallel Outputs
There are 16 identical parallel outputs. These may be used as status (tally) outputs to show the opera-
tional state of the unit, or they may be fed with a version of the corresponding input delayed by the
current delay amount.
These outputs can be configured by using normal
configuration
mode operations to get to
6EXT
and
then selecting
OUT1
or
OUT2
etc as appropriate. The outputs may be activated as below:
OFF
never
ON
always (useful for testing)
DLIN
a delayed version of the corresponding
parallel input
BYP
when bypassed
CNF
during
configuration
mode
WFS
when WAIT FOR SAFE is active
WAE
when WAIT AND EXIT is active
REB
when REBUILD-ing
RMP0
when RAMP-ing TO ZERO
SAFE
when the delay is greater than the con-
figured safe time
SNEZ
when SNEEZE is active
DUMP
when the DUMP button is pressed
LIVE
when the delay is at 0.00
STAT
when the delay value is stable and non-
zero
PANC
when in
panic
mode
FULL
when the delay is at maximum
MUTE
when the output is muted
SBRK
during a Station Break Insert operation
(see page 35)
TIM1
when the delay is greater than the con-
figured TIM1 value
TIM2
when the delay is greater than the con-
figured TIM2 value
INS
when an Insert operation is active (see
Insert Operations
below)
JBAD
the selected jingle is bad or absent or
the card is not present. Also activated
when the jingle is in use or being pre-
pared for use.
>MAX
the current delay is greater than the
maximum configured value (see
Insert
Operations
below)
TOP
the current delay is at the maximum al-
lowable value (see
Insert Operations
be-
low)
UNLK
when the digital audio input is unlocked
Summary of Contents for BD600+
Page 2: ......
