Eventide 141242, User Manual

Page: 37 / 132

4.1.10. Network
The network screen controls se tti ngs for connec ti ng your H9000 to a standard local area network. Once
a network connec ti on is established, you can use the Emote so ft ware to view and control H9000
parameters and update your H9000’s fi rmware.
The middle column of the network screen shows the available network connec ti ons, including:
Ethernet (for a hard-wired connec ti on directly to the computer, or through your local area network)
Wireless (for a connec ti on using the included Wi-Fi adapter, which can be connected to any of the
four USB connectors)
4.1.10.1. Ethernet Setup
Use the cursor bu tt ons to highlight the Ethernet fi eld in the middle column. The right-hand column will
display the parameters of the network you have joined including:
Network Name
Network Type (wired or wireless) IP Address
Netmask Gateway
4.1.10.2. Wireless Setup
To connect the H9000 to a wireless network:
Connect the included Wi-Fi adapter to one of the H9000’s four USB ports.
On the network screen, any available wireless networks will be automa
ti cally listed beneath the
Ethernet op ti on.
•
•
•
• •
• •
•
•
4. SETUP
37