www.event-lighting.com.au
4
Menu
Level 1
Level 2
Value
Information
DMX
DMX address
1-512
Set DMX address
CHAN
CH01
Use 1 channel mode
CH02
Use 2 channel mode
CH03
Use 3 channel mode
Manual
DIM
0-255
Manual control of Dimmer
D_F
0-255
Manual control of Dimmer-Fine
STO
0-255
Manual control of Strobe
CURVE
Linear
Linear dimming curve
Log
Logarithmic dimming curve
S
S dimming curve
Reset
YES/NO
Reset to factory default
TEMP
C.000
Current fixture temperature
FAN
Max
Fastest fan speed
Auto
Variable fan speed, based on thermal sensor
Silent
Theatre mode, meets the Nr25 standard
FADE
ON/OFF
Enable/disable fade time on dimming
VERSION
A109.01
Software version
Press Up and Down to select the desired operation, press Enter to select.
Set DMX Address
Select “DMX” then press Enter.
Use Up and Down to set the desired DMX address from 1 to 512.
Press Enter to confirm and save.
Set DMX Channel Mode
Select “Chan” then press Enter.
Use Up and Down to set the desired DMX channel mode.
Press Enter to confirm and save.
Refer to the DMX Chart below for more information on each mode.
Set Dimmer Curve
Select “Curve” then press Enter.
Use Up and Down to set the desired dimmer curve.
Press Enter to confirm and save.
Set Manual Control
Set the Dimmer, Dimmer Fine and Strobe values through the control panel.
•
Strobe speed 0 is always on, 1-100, strobe slow to fast.
Factory Reset
Select reset and press Enter twice to reset the device to factory default settings.