Evenflo Momentum 65, Owner'S Manual

Page: 22 / 37

40 41
For
ward-facing
Forward-facing Installation with
Lower Anchor Connectors
Forward-facing Installation with
Lower Anchor Connectors
4b. Secure the child
restraint –
SureLatch
Connector.
Using your full weight,
push the child restraint
firmly into the vehicle
seat, as shown, to set it
in place.
buckle storag
e
PUSH PLAC
E AT AR
M PIT
LE VEL
Forward-facing
Belt Path
buckle storage
Forward-facing
Belt Path
bu
ckle
st
orage
Note: In some vehicles, you
may need to prop up the
SureLatch Connector
while
pushing downward on the seat
to secure it tightly. Repeat for
the other SureLatch Connector.
4a. Secure the child
restraint –
Quick Connector.
Using your full weight,
push the child restraint
firmly into the vehicle
seat while pulling up on
the Lower Anchor Strap
to tighten, as shown.
IMPORTANT: To properly secure this child restraint, it
MUST NOT move more than 25 mm (1 inch) from side to
side or front to back at the forward-facing belt path .
If you cannot tightly secure the child restraint, try again or
move it to another location.
IMPORTANT:
To properly secure this child restraint, it
MUST NOT move more than 25 mm (1 inch) from side to
side or front to back at the forward-facing belt path .
If you cannot tightly secure the child restraint, try again or
move it to another location.
buc
kle
sto
rage
5. Connect and tighten
Tether Strap.
Connect the Tether Hook
to the vehicle Tether
Anchor behind the
vehicle seat, as shown.
IMPORTANT:
• The Tether Strap MUST be used when installing this
child restraint forward-facing with the Lower Anchor
Connector Assembly.
• If your Tether Strap is too short to reach from your child
restraint to your vehicle Tether Anchor, you will need a
Tether Extender. Please call ParentLink PREMIER Service at
1-800-233-5921 (U.S.) or 1-937-773-3971 (Canada), or
01-800-706-12-00 (Mexico).
(Please consult your vehicle owner’s manual, as Tether
Anchor locations may vary.) Pull the strap and tighten
the Tether securely.