25
1
Carrier is locked firmly into the base.
2
Carrier and base always face toward the rear of the
vehicle.
3
Handle is locked in the “car” or “stand” position.
4
Level indicator is completely within the “green.”
5
Locking clip is installed with lap and shoulder belts if
required.
6
Make sure the vehicle seat belt is routed through the
belt path, or when using the LATCH harness, that it is
routed through the belt path.
7
Child restraint can not move more than 1 inch (25 mm)
from side-to-side at the belt path.
8
Any excess LATCH harness strap routed through the
harness openings in the base.
Checklist for a Properly Installed Child Restraint
2
3
4
5
6
24
Press the
tab
B
on
the hook.
Press hook in
and twist to
release.
A
When the LATCH system is not in use, you
MUST
securely
store it in the area provided in the bottom of the base
C
.
Route the harness strap through the belt path
D
on top of
the base then attach the hooks to the slots located on each
side of the storage area beneath the base.
A loose LATCH harness and hook may injure your child.
Removing the LATCH System
1
Tilt and slide the adjuster
A
to loosen.
2
3
B
Tilt and slide the adjuster
A
to loosen.
C
D
1
7
