background image

29

The side pocket 

A

 is only for 

items that baby will need, 

such as pacifiers. 

DO NOT

 

store any sharp or heavy 

items in the side pocket.

Not available on all models.

Using the Side Pocket

WARNING

A

Place the optional Boot and 

Blanket 

E

 over the child 

restraint and your child. 

Fasten the elastic loops 

F

 

on both sides of the boot 

to the hooks  on the child 

restraint.

Place the optional Strap Covers 

D

 over the harness straps for 

your child’s comfort.

2

3

D

E

F

28

Insert front canopy end 

A

 into the outer canopy holder 

B

Insert the back canopy end 

C

 into the inner canopy holder 

D

. Repeat on the other side. 

NOTE:

 Some models have one 

set of canopy holders (

A

 and 

B

).

Installing the Canopy

C

A

B

D

The optional Head Support 

A

, and Double Head Support 

B

, should lie flat against the 

seat back, as shown. Be sure to 

cut off the plastic attachment 

between the head support and 

the seat pad. Small parts may 

be a choking hazard. 

B

NOTE:

 Support the child’s head. For about the first three 

months, a baby’s head needs extra support. Use a small 

rolled towel on each side of the baby’s head or the optional 

Head Support.

The optional Body Pillow 

C

 is used to help support your 

child by placing it in the restraint, as shown.

A

C

Not available on all models.

Installing the Accessories

1

Summary of Contents for Embrace 5




















Reviews: