background image

To order replacement parts you can order on-line at 

www.

evenflo.com

 or contact Evenflo at 

1-800-233-5921

When you contact us, please have the product model 

number and date of manufacture (found on the back of the 

child restraint).

•  To clean pad, slide the elastic loops of the seat pad off of 

the seat shell.  Remove the harness system. See “Chang-

ing the Harness Position” on page 12 to ensure proper 

reinstallation of harness straps. 

•  Cloth pad, canopy and head support may be machine 

washed separately cold water, delicate cycle, tumble dry 

10 – 15 minutes, low heat.

•  Wipe straps, buckles and harness adjuster with warm 

damp cloth and mild soap. Air dry. 

•  To help protect the vehicle upholstery, place a towel 

beneath and behind the child restraint. 

Care and Cleaning

Locking Clip

1

Canopy

2

Seat pad

9

Head Support

5

Double 

Head Support

6

3

Head Foam

8

Harness Covers

Harness System

10

Boot w/Blanket

7

4

Body Pillow

Not available on all models.

Replacement Parts

31

30

STORE YOUR 

INSTRUCTIONS

HERE 

After reading these instruc-

tions completely, 

STORE THE  

INSTRUCTIONS IN THE SEAT 

BEHIND THE SEAT PAD.

Storing Your Instructions

Summary of Contents for Embrace 5




















Reviews: