Evenflo embrace 35/pro Owner'S Manual Download Page 59

Page: 59 / 62

For a period of 90 days from the original purchase of

this Product, Evenflo warrants to the original end user

(“Purchaser”) this Product (including any accessories)

against defects in material or workmanship. Evenflo’s

sole obligation under this express limited warranty

shall be, at Evenflo’s option, to repair or replace any

Product that is determined to be defective by Evenflo

and determined to be covered by this warranty.
Repair or replacement as provided under this warranty

is the exclusive remedy of the Purchaser. Proof of

purchase in the form of a receipted invoice or bill of

sale evidencing that the Product is within the warranty

period must be presented to obtain warranty service.

This express limited warranty is extended by Evenflo

ONLY to the original Purchaser of the Product and is

not assignable or transferable to subsequent purchasers

or end users of the Product. For warranty service,

contact Evenflo’s ParentLink Consumer Resource

Center at (800) 233-5921 (U.S.), (937) 773-3971

(Canada), or

www.evenflo.com

EXCEPT TO THE EXTENT PROHIBITED BY

APPLICABLE LAW, ANY IMPLIED WARRANTY

OF MERCHANTABILITY OR FITNESS FOR A

PARTICULAR PURPOSE ON THIS PRODUCT IS

HEREBY DISCLAIMED. EVENFLO SHALL NOT BE

LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL,

SPECIAL OR PUNITIVE DAMAGES OF ANY KIND FOR

BREACH OF THE EXPRESS LIMITED WARRANTY ON

THIS PRODUCT, OR ANY WARRANTY IMPLIED BY

OPERATION OF LAW. OTHER THAN THE EXPRESS

LIMITED WARRANTY SET FORTH ABOVE, THERE ARE

NO OTHER WARRANTIES THAT ACCOMPANY THIS

PRODUCT AND ANY ORAL, WRITTEN OR ANY OTHER

EXPRESS REPRESENTATION OF ANY KIND IS HEREBY

DISCLAIMED.

Limited Warranty

www.evenflo.com

USA: 1-800-233-5921, 8 AM – 5 PM E.T.

Canada: 1-937-773-3971

México: 01-800-706-12-00

All manuals and user guides at all-guides.com

Summary of Contents for embrace 35/pro































































Search results

Summary of Contents for embrace 35/pro

Reviews:

Related manuals for embrace 35/pro

Brands by name

Popular brands

Evenflo embrace 35/pro, Owner'S Manual

Search results

Summary of Contents for embrace 35/pro

Reviews:

Related manuals for embrace 35/pro

Brands by name

Popular brands