41
Using the Locking Clip
E
F
F
When the lower anchor connector assembly is not in
use, you
MUST
securely store it in the area provided in
the bottom of the base
E
.
Route the harness strap through the belt path on top of
the base then attach the hooks to the slots
F
located on
each side of the storage area beneath the base.
A loose lower anchor assembly connector harness and
hook may injure your child.
3
To watch a video about installing a locking clip, go to
www.evenflo.com
.
Locking Clip
installed properly.
If your vehicle is
model year 1996 or newer,
it likely
has a vehicle belt system that can be locked when
tightened, and will not require use of a Locking Clip.
Consult your vehicle owner’s manual before
installing a Locking Clip.
Install Locking Clip,
if necessary.
If your vehicle was
built
prior to model
year 1996,
and has
a lap/shoulder belt
that is equipped with
an emergency locking
retractor (ELR) AND sliding
latch plate, you
MUST
use
a Locking Clip. Check your
vehicle owner’s manual to
identify which vehicle belt
system is in your vehicle.
13 mm
(0.5 inch)
All manuals and user guides at all-guides.com
