Evenflo embrace 35/pro Owner'S Manual Download Page 6

Page: 6 / 62

WARNING

Air Bag Warnings

•

DO NOT

use this restraint in the front seat of a

vehicle equipped with an air bag. Interaction
between a rear facing restraint and air bags may
cause serious injury or death. If your vehicle has an
air bag, refer to the vehicle owner’s manual for
child restraint installation.

• If the rear seat of your vehicle is equipped with side

air bags, refer to the following information for proper
usage.

Vehicles built prior to the 2002 model year:

DO NOT

use this restraint in a vehicle seating

position equipped with a side air bag unless
authorized by the vehicle manufacturer.

Model year 2002 and newer vehicles:

Refer to your vehicle owner’s manual before placing

this restraint in a seating position equipped with a
side air bag.

•

DO NOT

place any objects between the restraint and

the side air bag, as an expanding air bag may cause
the items to strike your child.

All manuals and user guides at all-guides.com

all-guides.com

Summary of Contents for embrace 35/pro































































Search results

Summary of Contents for embrace 35/pro

Reviews:

Related manuals for embrace 35/pro

Brands by name

Popular brands

Evenflo embrace 35/pro, Owner'S Manual

Search results

Summary of Contents for embrace 35/pro

Reviews:

Related manuals for embrace 35/pro

Brands by name

Popular brands