Evenflo 38211712, Owner'S Manual

Page: 15 / 31

29 28
TOC
1. Secure child restraint to the vehicle seat.

Child restraint is in Position #2 or #3 (page 30).

Child restraint base sits flat on vehicle seat.

Install with vehicle seat belt (page 30) or lower
anchor connector assembly (page 36).

Install tether strap (page 34 or 40).

Install locking clip, if necessary (page 32).
2. Set the child in the child restraint.
The top of the child’s ears MUST be below the top of
the child restraint seat back.
3. Make necessary adjustments.

Harness tabs MUST be at shoulder level
(page 41).

Crotch strap should be snug against the child
(page 43).
4. Fasten the buckle.
Refer to page 42.
5. Position and connect chest clip.
Chest clip MUST be at armpit level (page 42).
6. Check your work.

Child restraint is in Position #2 or #3 (page 30).

Child restraint base sits flat on vehicle seat.

To properly secure this child restraint it MUST NOT
move more than 25 mm (1 in.) from side to side or
front to back at the forward-facing belt path
(pages 33 and 39).

The child’s back and bottom are flat against the back
and bottom surfaces of the child restraint.

Harness tabs are AT shoulder level (page 41).

Buckle tongues are fully engaged.

Tether strap is securely attached and tightened
(page 34 or 40).
Using the Child Restraint
Forward-facing
Child Requirements:
• Weight: 10 to 29.4 kg (22 to 65 lbs)
• Height: 71 to 127 cm (28 to 50 in.) and tops of child’s
ears are at or below the top of the child restraint seat
back
• Age: At least 2 years old
IMPORTANT: Once your child exceeds any of the
size requirements for forward-facing use above, you
MUST discontinue use of this child restraint. Consider
use of a booster seat at that time.
Forward-facing Installation Checklist
For
ward-facing