9
EVELO.COM
Using Your Charger
The charger that comes with your
bike has internal controls that prevent
overcharging of the battery. First, plug
the charger into the battery:
Then connect the wire connections
at the charger block to and make sure
the cord is fully seated. Next, plug it
into a 120v AC outlet. The light on the
charger should be RED, and that light
will change to GREEN when the battery
is fully charged. We do not recommend
leaving the unit plugged in for extended
periods of time or using the charger
unit in poorly ventilated spaces such as
closets or drawers, as it may overheat.
In addition to the battery gauge on the
display panel, there is also a battery gauge on the unit itself. Simply press the red button
to see the current level of charge (useful when the battery is not installed on the bike.)
Installation of the battery is the opposite of removal.
Environmental Conditions
Temperature extremes can affect your battery. Please keep it within the following
temperature ranges, as suggested by the battery manufacturer:
Charging:
32 degrees to 113 degrees F (0 degrees to 45 degrees C)
Discharging and Storage:
-4 degrees to 140 degrees F (-20 degrees to 60 degrees C)
delta_manual_final_single.indd 9
12/06/2017 14:11
