11
EVELO.COM
STEP 2
Align the stem
1.
The stem is turned 90 degrees
from the riding position during
shipping. Rotate it so that it is in
line with the front wheel as follows.
2. Loosen the two bolts shown,
rotate the stem into position, and
securely retighten the bolts.
5. Close the lever 180 degrees and place into a horizontal position. Tension is correct
if the lever leaves a slight indentation in your hand. Tension is set at the factory,
but if you feel it is insufficient, contact us at 877-991-7272, or search “Maxel” on
our website:
http://support.evelo.com/support/solutions
STEP 3
Attach Handlebars
1.
Remove the four bolts that hold the
handlebar clamping bracket on.
2.
While taking care to keep the wires
and cables as straight as possible,
place the center of the handlebars
into the bracket and replace the
clamping bracket.
delta_manual_final_single.indd 11
12/06/2017 14:11
