
12
EVELO.COM
3.
Tighten the bolts evenly so there is equal space at the front and rear of the
bracket. Firmly tighten all 4 bolts.
STEP 4
Install Pedals
Keep in mind that the left and right pedals are threaded differently, and it is crucial that
they are installed on the correct side of the bicycle. For this reason, they are marked
“L” and “R” with stickers at the factory.
1.
Locate the right-side pedal (marked with an “R”).
2.
Thread the “R” pedal clockwise onto the drive-side crank (side of the bike with the belt).
3.
Tighten the “R” pedal clockwise with a 15mm wrench or the wrench provided.
4.
Locate the left-side pedal (marked with an “L”).
5.
Thread the “L” pedal COUNTER-CLOCKWISE* onto the non-drive-side crank (side of the
bike without the belt).
6.
Tighten the “L” pedal COUNTER-CLOCKWISE with a 15mm wrench or the wrench provided.
FIT ADJUSTMENTS
Many parts of your new EVELO Electric Bicycle can be customized for a personalized fit.
Seat Adjustment
The seat is easily adjusted up or down by flipping the quick-release lever that clamps
the post into the bike. Note that there is a “minimum insertion line” stamped on the
seat post that must be adhered to for safety’s sake. (If you need your seat to be higher
than permitted with the stock seat post, please contact us.)
The seat can also be moved forward and backward by loosening the single bolt on the
underside of the seat. Since it slides on its rails, there is no need to remove the bolt —
just loosen it, adjust, and firmly re-tighten.
delta_manual_final_single.indd 12
12/06/2017 14:11