EVJ 700
EVJ 700
EVJ 700
EVJ 700 ----
Application Manual:
144EVJ700E204
EVCO | 29.01.2021
| 35
Fryers
Fryers
Fryers
Fryers
Inputs available
–
Tank temperature probe
–
Push encoder
Outputs available
–
Heater
–
Motor-driven basket 1
–
Technical room fans
–
ON-OFF
–
Motor-driven basket 2
Information displayed
The display shows the cooking time of the two baskets (T1, T2) and, depending on how parameter “
e4
” is set, shows the
temperature reading or the tank setpoint.
When the machine is switched on, only the time T1 of the first basket will be displayed by default, while timer
T2 will only be displayed when selected.
Once the timer has elapsed, the display will still show 00:00 until the controller is switched off.
After switch-on
Following selection of timer T2
Available functions
Device ON/OFF
When the display is switched on, the following values are uploaded:
Temperature: 0
Time: T1: 00:00
Selection of tank temperature
Selection range [0 (r1) <-> 200°C (r2)]
Selection of active basket
Choice of basket which the timer applies to
If motor-driven baskets are in use, see paragraph “Management of motor-driven baskets”
Selection of cooking time (referring to the selected basket T1/T2)
Selection range: [00:00<->59:59 mm:ss]
Activation MELT function
When this mode is activated, the MELT icon
replaces the temperature
icon. This icon will flash; the keys to select the temperature and time will be
deactivated. The value of the displayed temperature is set by parameter “
e4
”.
This function can only be activated when the temperature of fryer is below 50°C
(parameter “
r15
”). To quit this mode, press the relative key again (or the push button on the encoder); the icon will
stay on and the temperature/time will be displayed.
