EVCO S.p.A.
EV3 CHIL & EVD CHIL | Installer manual ver. 1.2 | Code 1443DCHILE124
page 26 of 46
5.4
Menu
5.4.1
Access levels
There are three access levels for navigating within the menus, two of which require a password:
U
User:
always
visible
S
Servicer: visible if the servicer password (parameter CF09, default -12) or the manufacturer password (parameter CF10,
default -123) have been entered
M
Manufacturer: visible if the manufacturer password (parameter CF10, default -123) has been entered.
5.4.2
Menu list
The following menus are available:
SEtP
For rapid access to the adjustment set-points
Prob
Shows the temperature or pressure values for the inputs configured as probes
ALAr
Shows the list of alarms underway
di
Shows the status of the inputs configured as digital inputs
Ao
Shows the status of the outputs configured as analogue outputs or as triac/open collector
do
Shows the status of the outputs configured as digital outputs
PAr
Shows and allows the device parameters to be altered. The parameters are grouped according to their function, identified
on the display by a label. Each parameter has an alphabetic code followed by two numbers, as shown in the table below.
GROUP
IDENTIFICATION LABEL
PARAMETER CODE
Configuration ConF
CF
Compressor CoMP
CP
Fan FAn Fn
Alarms ALAr AL
Adjustment rEGL
rL
Pump PUMP PM
Offset OFF oF
OHr
Shows the time the compressors (OH1 and OH2) and the pump (OHP) have been functioning.
HiSt
In devices fitted with a clock, up to 20 alarm events can be stored in the memory. The history and details of these are
shown on the lower display in the following sequence.
y xx
year
M xx
month
d xx
day
hh:mm hours:minutes
rtC
The time can be set on devices fitted with a clock.
inFo
Shows the FW version (project, variation and revision)
PASS
The password is entered for access to the desired level: parameter Cf09 for servicer level, Cf10 for manufacturer level.
