EVC electronic GmbH
-7-
BSL100 Manual
BSL132 Probe
Pict. 1: Connectors and indicators of the BSL132 probe.
The BSL132 probe is necessary on Bosch ECUs
where more then one bootpin must be
configured.
Like on the BSL130 probe, the power to the ECU
is controlled by the BSL100 module.
The BSL130 probe is shipped together with a12V
power supply which powers the ECU.
Up to four cables connecting the bootpins to the
corresponding 2 mm H- and L-Terminals of the
BSL132 adap-ter.
The switch toggles the H- and L- Terminals
between CAN boot mode (conducting) and
normal boot mode (high impedance state).
Pict 2: The pin out of the 2 x 7 pad array.
