background image

15. WARRANTY 

 

Warranty 

Eva Stampaggi S.r.l. guarantees that the stove is built in accordance with EN 13240 (wood-burning stoves) EN 14785 (pellet stoves) and EN 12815 (wood-burning 

stoves and stoves), using high quality and non-polluting materials. 

Eva Stampaggi S.r.l. guarantees that the stove is free from defects that make it unsuitable for its intended use or significantly reduce its value. The rules of the 

Italian Civil Code or applicable national law governing the guarantee in the sales contract, or applicable national law ex D. Int. 

Any non-conformity can be claimed under the guarantees and procedures provided for in Legislative Decree 206/2005, provided that the Buyer was aware of the 

defect, or could not ignore it with ordinary diligence, or if the lack of conformity derives from instructions or materials provided by the same. 

The warranty excludes malfunctions, defects and/or faults and consequent damages, resulting from property and/or persons, attributable to an abnormal and/or 

improper use of the product and/or not in compliance with safety regulations and/or the “Pellet Stove Instruction Manual”, or resulting from an installation that does 

not comply (to which the absence of documents certifying such compliance is also equated) with current regulations and safety  directives, or performed by 

unqualified personnel (UNI10683 and UNIEN 1443), or when, by way of example, there is a direct discharge to the wall. 

Likewise, any non-conformity that may be randomly attributed to a use or installation of the product that does not comply with applicable laws and regulations 

and/or the instructions contained in this "Pellet Stove Instruction Manual” will not be covered by warranty. 

The aforementioned warranty is also excluded for defects in conformity, malfunction, defects and/or faults and the consequent damage, caused to property and/or 

persons, resulting from the use of the stove in a manner that does not comply with safety directives. 

The warranty for malfunction, defects and/or defects and/or faults does not work and Eva Stampaggi S.r.l. assumes no responsibility for damages caused to 

property or persons resulting from: the lack of first ignition carried out by a specialised technician, to which the absence of such documents, proving said operation, 

is equated; from the violation and/or non-compliance with the provisions of this Instruction Manual; from the tampering and/or alteration of the stove and its electrical 

board; from the non-compliance with lights and alarms; from the failure to clean and routine maintenance; from the failure to clean and extraordinary maintenance 

carried out by specialised technical personnel, to which the absence of documents proving said maintenance is equated; from the improper use of the stove; from 

the lack of installation requirements; from the non-compliance with the procedures for reporting conformity defects provided for in Legislative Decree no. 206/2005; 

from the use of unsuitable or poor fuel; from modifications and/or repairs carried out without prior communication and relative authorization of Eva Stampaggi S.r.l.; 

from the use of non-original and/or non-specific spare parts for the stove. 

The above list must be considered non-exhaustive and therefore the cases not expressly indicated but which, by virtue of analogical interpretation, can be equated 

with the cases listed must also be considered included among the cases of exclusion of the guarantee. 

All the following differences related to the natural characteristics of the coating materials are excluded from the warranty: the grains of the stones that are the main 

characteristic and that guarantee their uniqueness; any small cracks or cracks that could be highlighted in ceramic/majolica coatings; any differences in shades 

and shades on ceramic/majolica coatings; door glass; gaskets; masonry works. 

Eva Stampaggi S.r.l. assumes no responsibility for: damage to chromed and/or anodised metal parts and/or painted or otherwise with treated surfaces, if due to 

rubbing or impact with other metals; damage to chromed and/or anodised metal parts and/or painted or in any case with treated surfaces, if due to improper 

maintenance and/or cleaning with products or chemical agents (said parts must be cleaned using only water); damage to mechanical components and mechanical 

parts due to their improper use or installation by non-specialist personnel or, in any case, for installation that did not comply with the instructions contained in the 

packaging; damage to electrical or electronic components and parts due to improper use or installation by non-specialist personnel or, in any case, for installation 

that did not comply with the instructions contained in the packaging. 

Ignition resistors are material subject to wear and tear, the duration of which depends on the use of the stove; the relative warranty is therefore limited to the first 6 

months of use of the product. 

Warning: after purchase, keep the warranty certificate together with the original packaging of the product, the installation and testing certificate and 

the receipt issued by the seller. The date of the sales tax document will determine the actual duration of the warranty. 

 

The warranty provided shall be subject to the following terms and conditions: 

The 

after-sales

 procedure is managed by our staff, who may be contacted on  

+39 0438 35469

 or by sending an e-mail t

[email protected]

  

Our qualified staff will provide you with information concerning technical, installation or maintenance problems. 

If the problem cannot be resolved over the phone, out staff will forward the issue on to the user's 

T

echnical 

A

ssistance 

C

entre, who will guarantee service within 

five working days 

Any parts replaced during the warranty period shall be covered for the remaining period of the purchased product warranty. 

The manufacturer shall not pay the customer any indemnities for the inconvenience of not being able to use the product during the period required for repairing. 

Should it be necessary to replace the product, the manufacturer will deliver it to the dealer who will then deliver it to the end user following the same procedure as 

for the product purchase. 

This guarantee is valid within Italy; in the event of sale or installation carried out elsewhere, the guarantee must be recognised by the distributor in that territory. 

The warranty is carried out with the repair or replacement of defective parts, or defective parts or the entire product, at the discretion of the company. 

 

When requesting assistance, you must have the following to hand: 

  Serial number 

  Stove model 

  Purchase date 

  Purchase location 

  Warranty goodwill certificate completed by specialised C.A.T. 

 

 

IMPORTANT: 

 

EVA STAMPAGGI ADVISES TO CONSULT WITH ITS AUTHORIZED DEALERS AND SERVICE CENTERS. 

 

AN INSTALLATION ACCORDING TO THE LAW IS MANDATORY, EVA STAMPAGGI STRONGLY RECOMMENDS A 

FIRST IGNITION OF ITS PRODUCTS WITH A QUALIFIED TECHNICIAN. 

 

EVA STAMPAGGI HAS NO LIABILITY OF ONLINE SALES AND RELATED OFFERS, BECAUSE IT DOES NOT MAKE 

DIRECT SALES TO THE GENERAL PUBLIC. 

 

FOR ANY TECHNICAL PROBLEM DURING THE PERIOD OF THE LEGAL WARRANTY, THE PROCEDURE 

REQUIRES TO CONTACT THE DEALER OR DIRECTLY OUR AFTER SALE SERVICE. 

 

 

 

 

 

 

 

 

 

25

Summary of Contents for SB 80





























Reviews: