ALAR FUME PROBE
FUME PROBE ACTIVE ALARM
AL2 FUME PROBE
AL. FUME P.
FAULTY FUME SENSOR
CALL TECHNICAL SUPPORT.
FUME SENSOR DISCONNECTED
CALL TECHNICAL SUPPORT.
ALAR HOT TEMP
HOT SMOKE ACTIVE ALARM
AL3 HOT FUMES
AL. T. FUMES
FAULTY FUME SENSOR
CALL TECHNICAL SUPPORT.
FAULTY CONTROL BOARD
CALL TECHNICAL SUPPORT.
FAULTY EXCHANGER BLOWER
CALL TECHNICAL SUPPORT.
EXCESSIVE PELLET SET VALUE AT MAXIMUM HEAT
OUTPUT
CALL TECHNICAL SUPPORT.
CLEANER/DOOR ALARM
BURN POT CLEANING MECHANISM BLOCKED OR
FIRE DOOR OPEN/CLOSED INCORRECTLY
-CHECK THAT THE FIRE DOOR IS CLOSED CORRECTLY
-CHECK THAT THERE ARE NO FOREIGN BODIES BLOCKING THE
BURN POT CLEANING MECHANISM
- CALL TECHNICAL SUPPORT
TURBULATOR/DOOR ALARM
TURBULATOR CLEANING MECHANISM BLOCKED OR
FIRE DOOR OPEN/CLOSED INCORRECTLY
- CHECK THAT THE FIRE DOOR IS CLOSED CORRECTLY
- CALL TECHNICAL SUPPORT
THERM/DOOR SAFETY ALARM
THERMAL SAFETY THERMOSTAT OR FIRE DOOR
OPEN/CLOSED INCORRECTLY
- LET THE STOVE COOL, RE-ARM THE MANUAL THERMOSTAT AT
THE REAR. - RESTART THE STOVE
-CHECK THAT THE FIRE DOOR IS CLOSED CORRECTLY
ALARM AUGER TUBE TRIAC
THE BOARD DETECTS INCORRECT OPERATION OF
THE PELLET LOADING MOTOR
-SWITCH THE STOVE OFF AND BACK ON
- CALL TECHNICAL SUPPORT
T. card (°C)
THE TEMPERATURE OF THE BOARD HAS EXCEEDED
70°C
ALLOW THE STOVE TO COOL AND THEN TURN THE STOVE BACK
ON. IF THE ALARM REAPPEARS, CONTACT TECHNICAL SUPPORT.
(SIGNAL SEARCH) NO REMOTE
CONTROL CONNECTION
REMOTE CONTROL HAS LOST THE UNIT
PRESS THE KEYS 1 AND 2 SIMULTANEOUSLY FOR ABOUT 3-4
SECONDS UNTIL THE "CHOOSE UNIT" APPEARS
(UNIT 0 IS THE FACTORY DEFAULT)
POSSIBLE INTERFERENCE
TRY DISCONNECTING FROM THE MAINS SUPPLY ANY
HOUSEHOLD APPLIANCE OR ANY OTHER APPLIANCE THAT MAY
GENERATE ELECTROMAGNETIC FIELDS.
REMOTE CONTROL DOES NOT SWITCH
ON
DISPLAY SWITCHED OFF
CHECK BATTERY / FAULTY REMOTE CONTROL.
22
