4. White
Balance
Setting
Push joystick down to select <WHITE BALANCE> and then push joystick left or right to
select white balance mode.
ATW: Auto Tracing White Balance, suitable for 2500~9500K color temperature
environment.
PUSH: Push mode, suitable for 2300~10000K color temperature environment.
MWB: Manual White Balance, suitable for 2500~9500K color temperature
environment.
Select <MWB> and press
key into MWB adjustment image and then
push joystick left to adjust white balance to higher color temperature or push joystick
right to adjust white balance to lower color temperature.
Confirm color temperature and then press
key to recode datum in the
memory.
5. IR Cut Filter Setting
Push joystick down to select <IR CUT REMOVE> and then push joystick left or right to
select mode
Auto: When light level is over 30 lux, IR Cut Filter switches IN automatically to produce color
image. When light drops below 10 lux, IR Cut Filter switches OUT automatically to produce
monochrome image. Under monochrome mode, sensitivity is increased to 0.01 lux and can be
used with IR illuminators.
When selection is <AUTO>, press
key into IR Cut Setting menu.
Push joystick down to select <IR SENSITIVITY> and then push joystick left or right to
select sensitivity steps (01~15).
Note: When IR sensitivity setting value is low and lightness is darker, IR CUT Filter will
be performed.
74
