5. Fast Dome Camera Set Up
5. 1 RS-485 Protocol Switch Setting
Explanation of DIP Switch Setting:
1. RS-485 In-TML RES : RS-485 IN Terminal Resistor ON/OFF
2. RS-485 OUT-TML RES : RS-485 OUT Terminal Resistor ON/OFF
3. HALF/FULL :2 wiring system (HALF duplex) or 4 wiring system (Full duplex)
4. BAUD SEL 1 :Transmission speed selection 1
5. BAUD SEL 2 :Transmission speed selection 2
6. PROTOCOL SEL 1 :Protocol selection 1
7. PROTOCOL SEL 2 : Protocol selection 2
8. PROTOCOL SEL 3 : Protocol selection 3
9. PROTOCOL SEL 4 : Protocol selection 4
10. - :NA
(Using Pelco D, please contact your nearest agent)
RS-485 In/Out Terminal Resistor Setting
Daisy Connection: Set RS-485 In and Out terminal resistor as ON (Factory Initialize)
Parallel Connection: Set the front and last equipment terminal resistor as ON. The parallel
connection equipment in the middle set as OFF to keep the best transmitted statues.
11
