11.11 Configuration of Event
General
Trigger
System provides “GPIN” and “Motion Detection” for event detection.
z
GPIN & GPIO Input Status: They are auto detected and display the status.
z
Motion Detection: Make a checkmark on this option to start detect the motion area. See next
segment to set the motion area.
Action
Make a checkmark on either FTP Image, Mail Image, or on all of them, to determine what action should
be taken when the event is triggered.
FTP Image: Send the image to the configured FTP site when event is triggered. Click on the link to
set the FTP server.
Mail Image: Send the image to the configured mail address when event is triggered. Click on the
link to set the Email addresses.
Alert Message Status: They are auto detected to display the status, the signal can be used with the
recording application software on PC.
Apply: Click this button to save the changes made.
54
