12.14 Alarm Management
The 6 alarm inputs of each fast dome are corresponding with the first 6 preset positions. When an alarm
signal is triggered, the dome will go to the relevant position at 360
°
/sec. Make sure the first 6 preset
positions are set to desired alarm areas. Alarm input can be set to NC (normally close) or NO (normally
open) depends on alarm detector.
Relationship Between Alarm Inputs and First 6 Presets
Alarm Input 1 will send the dome to Preset Position 1
Alarm Input 2 will send the dome to Preset Position 2
Alarm Input 3 will send the dome to Preset Position 3
Alarm Input 4 will send the dome to Preset Position 4
Alarm Input 5 will send the dome to Preset Position 5
Alarm Input 6 will send the dome to Preset Position 6
Alarm Response Mode
The fast dome alarm response can be set to Lock or Release mode
Lock: Dome remains at last alarmed preset point
Release: Dome moves between alarmed points then reverts to prior status such as auto pan.
Lock Mode:
When an alarm is triggered, the dome will go to the relevant position at 360
°
/sec and
the keyboard will audio alert user until it is canceled manually. To manually cancel the alarm trigger,
push
key. If more than one alarm is triggered, the fast dome will
lock on the last alarm triggered position.
Release Mode:
1. Under Auto Pan Mode
When an alarm is triggered under Auto Pan, fast dome goes to the relevant position at 360
°
/sec. The alarm is canceled automatically and gets back to Auto Pan mode after alarm time. If
more than one alarm is triggered, the fast dome moves between alarmed points every 5
seconds and gets back to Auto Pan mode.
2. Not Under Auto Pan Mode
When an alarm is triggered not under Auto Pan, the fast dome goes to the relevant position at
360
°
/sec. The alarm is canceled automatically after alarm time. If more than one alarm is
triggered, the fast dome moves between alarmed points every 5 seconds.
3. The audio alert for alarm trigger will remain on until it is manually canceled by pushing the
key.
63
