Eusso UNC7825 Series, User Manual

Page: 65 / 127

4. Click ESC button to exit menu, when finish or click Up or Down button to select next item.
White Balance Mode Selection
One of four different White Balance Modes can be selected. (Factory Default is ATW)
z ATW : Auto Trace White Balance, is a feedback system that automatically aligns the white balance by detecting the
R-G and B-G before gamma correction processing.
z AWC : Auto White Balance Correction, is performed at a faster operating speed than ATW without an operation or
other limitations.
z Indoor : Fix mode White Balance, suitable for 3200K color temperature environment.
z Outdoor : Fix mode White Balance, suitable for 6400K color temperature environment.
1. Click OSD(Enter) to recall OSD Setup Menu.
2. Click the Up or Down button to select 7th item "WB Mode" on menu.
3. Click Left or Right button to make selection : AWC -> Indoor -> Outdoor -> ATW
Note : When AWC is selected, "Lock" will be showed under "WB Cont".
When Indoor is selected, "3200K" will be showed under "WB Cont".
When Outdoor is selected, "6400K" will be showed under "WB Cont".
When ATW is selected, "Auto" will be showed under "WB Cont".
- 64 -