Eusso UNC7825 Series User Manual Download Page 11

Page: 11 / 127

1.3

DIP Switch Setting

Fan Power Switch

Turn the number 2 switch to ON position to activate the internal fan. This will maintain the temperature inside and

make electric parts life.

Alarm Mode Switch

Alarm Mode can be set as Lock or Release mode. Turn number 1 switch to ON position to choose Release mode.

Turn number 1 switch to OFF position to choose Lock mode. The NDC has 6 alarm inputs and 1 output, which

can be set either NC (normally close) or NO (normally open) mode. Turn number 2 switch to NO position to

choose NC mode. Turn number 2 switch to OFF position to choose NO mode.

Camera Function Switch

For UNC7825-O, UNC7825-OW (25X optical lens model) and UNC7825-O T, please refer to

“

5. Advanced Settings for

UNC7825-O

”

, “

6. Advanced Settings for UNC7825-OW

” and “

7. Advance Settings for UNC7825-OT

” for details.

- 10 -

Summary of Contents for UNC7825 Series































































































































Search results

Summary of Contents for UNC7825 Series

Reviews:

Eusso UNC7825 Series, User Manual, Page: 11 / 127

Search results

Summary of Contents for UNC7825 Series

Reviews: