37
MAC address: This field allows you to provide a unique MAC address for
WIRELESS ROUTER to connect Internet. It is usually requested by your ISP.
3.4.2
Port Trigger
Port Trigger function allows you to open certain TCP or UDP ports to
communicate with the computers connected to WIRELESS ROUTER. This is
done by defining trigger ports and incoming ports. When the trigger port is
detected, the inbound packets to the specified incoming port numbers are
redirected to your computer.
Enable Port Trigger: Enable/Disable the port trigger.
Description: Enter the name of port trigger.
Trigger Port: This is the port used to trigger the application. It can be either a
single port or a range of ports.
(Trigger) Protocol: This is the protocol used to trigger the special application.
Incoming Port: This is the port number on the WAN side that will be used to
access the application. You may define a single port or a range of ports. You
can use a comma to add multiple ports or port ranges.
(Incoming) protocol: This is the protocol used for the special application.
3.4.3
Virtual Server
To make services, like WWW, FTP, provided by a server in your local network
