20
You can use ping command under DOS prompt to check if you have setup
TCP/IP protocol correctly and if your computer has successfully connected to
this router.
1)
Type ping 192.168.1.1 under DOS prompt and the following messages will
appear:
If the communication link between your computer and router is not setup
correctly, after you type ping 192.168.1.1 under DOS prompt following
messages will appear:
Pinging 192.168.1.1 with 32 bytes of data:
Request timed out.
Request timed out.
Request timed out.
This failure might be caused by cable issue or something wrong in
configuration procedure.
3. Configure Wireless Router via Web Based Utility
The Wireless Router implements a Web server allowing user configure this
device via the web based Utility. This Utility provides comprehensive system
management scheme, including system configuration, performance
monitoring, system maintenance and administration.
3.1 Access Web Based Configuration Utility
To access the Web-Based Configuration Utility, you have to launch your
Internet Browser. (MS IE 6.0 or later, Netscape Navigator 4.7 or later).