7
Eurotramp - Trampoline Kurt Hack GmbH
•
The springs of the START- and END-segment
must be attached at the frame hooks
diagonally from the bed in frame direction
(see the drawing). The bed must be attached
in the way that the bed ends pass over the
START- and END leg-sections.
•
To the middle sections of the track the
springs are attached straight (see the
drawing). Mount the springs in an upright
position as you move towards the centre of
the jumping sheet (see drawing).
Jumping bed assembly (with the stamped side facing up)
START-segment
middle-segment
END-segment
•
Abschluss der Montage mit dem
Anfangssegment der Bahn.
•
Track frame can be put on nal position.
Required material
•
Mounting tool
•
Safety gloves (not in scope of delivery)
The jumping bed should preferable be attached by 2 persons.
2
4
1
Please note
Important:
the spring ears
should point
downwards!
•
Hang in 3 steel springs per corner
first of all to fix the jumping
bed. To avoid a hanging of the
bed, attach temporarily some
springs on the left and right side.
•
Attachment of the springs at the bed
by boring the longer hook of the spring through
the fabric from the upper side. Please avoid
damaging of the PVC-rope.