No.2:RUG-007/011/053 No.3:RUG-008/009/054
No.2 and No.3 Steel Rugby Posts
INS631
Revision 5
©
08/09/2015
Harrod UK Limited
Code:
Product:
Important Note for RUG-053 & RUG-054
If RUG-053 or RUG-054 have been purchased
for adapting an existing set of rugby posts, you
will need to cut down your existing uprights as
follows:
For sockets installed 25mm below ground level
the distance from the underside of the channel to
the bottom of the upright needs to be 2925mm.
For sockets flush with ground level this needs to
be 2900mm.
IMPORTANT
: Please read the assembly instructions
carefully before starting to assemble you posts
Pack Contents:
4
5
1
3
View of Product
Fig 1
1.2m
1m
1.2m
Safety Notes
1
2
4
A risk assessment must be carried out on the
erection of Hinged Rugby and Rugby Adaptors.
Always use mechanical assistance if the Risk
Assessment highlights this requirement.
Always check fasteners before use and tighten
where necessary.
Periodically apply grease to hinge fixing bolts to
pre-long the life the posts.
Posts should always be taken down if strong
winds are forecast.
Post Protectors must be used with all Hinged
Rugby Posts to cover the hinge arrangement.
3
6
5
2
No2 Only
No2 Steel Rugby Posts
RUG-053 No2 Hinge Adaptor Only
No3 Steel Rugby Posts
RUG-054 No3 Hinge Adaptor Only
1. 4 x FEP211
Hinge Assembly
1. 4 x FEP211
Hinge Assembly
1. 4 x FEP223
Hinge Assembly
2. 4 x FEQ666
Upright
2. 4 x RUG-100 Upright
3. 1 x RUG-101 Pair of Crossbars
4. 4 x RUG-102 Ground Socket
1. 4 x FEP223
Hinge Assembly
(RUG-011 only)
(RUG-009 only)
(RUG-009)
(RUG-008)
2. 4 x FEQ664
Bottom Upright
2. 4 x RUG-105 Bottom Upright
3. 1 x RUG-101 Pair of Crossbars
4. 4 x RUG-107 Ground Socket
5. 4 x RUG-106 Top Upright
(RUG-011)
(RUG-007)
Tools Required
1 x 22mm Spanner
2 x 19mm Spanners
2 x 17mm Spanners
1 x Spirit Level
1 x Tape Measure
2 x Step Ladders
