Eurotherm 605 Series, Product Manual Installation & Instructions

Page: 14 / 221

1-2
Getting Started
605 Series Frequency Inverter
Equipment Inspection
•
Check for signs of transit damage
• Check the product code on the rating label conforms to your requirement.
If the unit is not being installed immediately, store the unit in a well-ventilated place away from
high temperatures, humidity, dust, or metal particles.
Refer to Chapter 2: “An Overview of the Inverter” to check the rating label/product code. Refer
to Chapter 8: “Routine Maintenance and Repair” for information on returning damaged goods.
About this Manual
This manual is intended for use by the installer, user and programmer of the 605 inverter. It
assumes a reasonable level of understanding in these three disciplines.
Note: Please read all Safety Information before proceeding with the installation and operation
of this unit.
Enter the “Model No” from the rating label into the table at the front of this manual. There is
also a column for you to record your application’s parameter settings in the table in Chapter 10.
It is important that you pass this manual on to any new user of this unit.
Initial Steps
Use the manual to help you plan the following:
Installation
Know your requirements:
•
certification requirements, CE/UL/CUL conformance
•
wall-mount or enclosure?
•
conformance with local installation requirements
•
supply and cabling requirements
Operation
Know your operator:
•
how is it to be operated, local and/or remote?
•
what level of user is going to operate the unit?
•
decide on the best menu level for the Operator Station (where supplied)
Programming (Operator Station or suitable PC programming tool only)
Know your application:
•
install the most appropriate macro
•
plan your “block diagram programming”
•
enter a password to guard against illicit or accidental changes
•
learn how to back-up your application data
•
customise the Operator Station to the application