27
MAINTENANCE
Make sure to periodically check any air ducting inlet and
outlet grilles .
Periodically check for any obstructions in the condensate
discharge pipe .
Heating element reset
The heating element is provided with two control
thermostats, one automatic reset and the other calibrated to
85 °C with manual reset.
If this second thermostat intervenes, it must manually reset .
To do this it is necessary to remove the front panel by
undoing the four screws (A fig .4) .
After removing the panel, remove the heating element
protection cover indicated by the label HEATERS . Remove
the cover screws (B fig .4) .
Press the red button on the thermostat .
Close the protection cover and front panel .
CLEANING THE INLET GRILLES
CLEANING THE CONDENSATE DRAIN
HEATING ELEMENT SAFETY INTERVENTION
B
B
B
A
A
A
A
B
B
B
B
A
A
A
A
B
Fig .3
Fig .4
