11
MINIMUM OPERATING SPACES
REQUIREMENTS OF PLACE OF INSTALLATION
MAIN CHARACTERISTICS
Respect to the free space around the machine shown in
the figure, to ensure adequate accessibility and facilitate
maintenance and checking operations .
ATTENTION! Before carrying out any installation operation, make sure the following conditions are met
in the place where the water heater is to be installed:
- The installation room must be dry and protected against frost .
- The recirculation air and exhaust air must be free of dust and grease and must not have a high contamination of
halogenated hydrocarbons .
- Min . room volume 20 m
3
with adequate air change
- Min . load limit 500 kg .
- The equipment must be accessible for maintenance work (see the section on minimum spaces) .
- Piping for draining the condensate water can be provided for .
- A single-phase 230 Volts ~ 50 Hz power supply is available near the place of installation;
0,6 m
0,6 m
0,6 m
0,1 m
Fig .2
