7
Eurotek RBT 7000
4. Brake tester Construction
Roller brake tester with weighing unit is composed by follows parts:
•
Tester: Roller Bed
Load cell unit, Roller, Gearbox, Motor, transmission chain, Force sensor 7 Roller cover
plates
•
Control Station:
Cabinet, Monitor, Computer, Keyboard, Mouse, Printer, Main Switch, Control Board,
Circuit Board, etc.
5. Installation
The pit should be constructed with C25 concrete. Follow the instructions of the pit construction
map drawing provided by your service provider. Make sure the pit dimensions are correct and the
concrete has completely set.
To install the equipment, follow the guidance of the engineers from your service provider. Please
carefully check the delivery items against the packing list before installation.
5.1 Equipment Installation
•
Check the quality of pit construction; dimension tolerances should respect the requirement
of the pit construction map drawing
.
•
Place the two support bars inside the pit. Adjust the distance between 2 bars (of 2790 mm);
make sure the bars are well located in the pit and are also able to match the relative
positions of the 4 sensors on the test bench. Then use a gradient meter to adjust the
horizontal level of the support bars. Fix the support bars with expandable bolts
.
