Installation and Setup
VoIP²ALL 8 - 16 - 24 Channel Gateway User Guide
www.eurotech-communication.com
10
11)
Position the SIM in the port SIM socket so that the SIM's metal contact is facing up and the
snubbed edge is on the right hand side directed into the SIM socket.
12)
Gently push the SIM card into the SIM socket until you hear a click. The SIM is now installed.
2.3.2.2.
REMOVING LOCAL SIMS
To remove a Local SIM
1)
Locate the port containing the SIM you want to remove.
2)
Press gently on the SIM until you hear a click.
3)
Pull the SIM from the socket completely.
Important: Do not leave the SIM half way in or out. This will disable the port from loading SIMs from
the SIM Server.
2.3.2.3.
INSTALLING SIMS IN THE INTERNAL SIM SERVER (OPTIONAL)
Each SIM Server card has 32 SIM chambers which are marked from 1 to 32.
To install a SIM in the internal SIM Server:
1)
Extract the SIM Server card by holding the handle and pulling the card from the Gateway.
2)
To open the chamber:
From the top side - gently push the metal slide in the direction of the connector and lift.
From the bottom side - pull the metal slide from the direction of the connector and lift.
3)
Position the SIM card in the chamber with the metal contacts facing downwards and the snubbed
edge facing to the:
right - for top side
left - for bottom side
4)
Push the metal housing down towards the card.
Note: If you have inserted the SIM in the proper manner, the chamber will close flat to the Server
card and cannot slide out.
5)
Slide the metal housing back into the locked position. The SIM card is now in place.
