Eurotech ReliaGATE 10-14 Series, User Manual

Page: 82 / 90

14 How to install the product ReliaGATE 10-14 User manual Rev. 0-10
14.1 How to install the product on a DIN Rail
Prerequisite: Make sure that the DIN rail is placed horizontally.
To install the product on a horizontal DIN rail, complete the following steps:
1. Position the product so that the lower side of the mounting bracket hooks on the lower edge of the
DIN rail, see step 1
2. Push the product upwards against the DIN rail until the upper hooked side of the mounting bracket
locks on the upper edge of the DIN rail, see step 2. The product is now installed on the DIN rail.
82 / 90