Eurotech BoltGATE 20-25, User Manual

Page: 99 / 102

BoltGATE 20-25 User Manual Rev. 1-1 15 How to Maintain the Product
15 H
OW TO
M
AINTAIN THE
P
RODUCT
Periodically inspect the product to verify its integrity and to ensure proper operation.
To maintain the product, complete the following steps:
1. Carefully read and understand the instructions contained in the section "Safety Instructions" on
page 9
2. Safely remove the power supply
3. Prevent damaging electrostatic-sensitive devices
4. Verify the installation of the product
5. Clean the product
15.1 How to Safely Remove the Power Supply
WARNING
THE PRODUCT CAN BE POWERED WITH A HAZARDOUS VOLTAGE.
CONTACT MAY CAUSE ELECTRIC SHOCK OR BURN.
To avoid injuries, before maintaining the product:
1. Make sure that you have read carefully and understood the instructions
contained in the section "Safety Instructions" on page 9
2. Make sure that you have disconnected all power.
Failure to follow the steps below may create an electric shock hazard, which could result in
personal injury or loss of life, and/or damage the product or other property.
To safely remove the power supply from the product, complete the following steps:
1. ALWAYS make sure your hands are dry before performing any cables disconnection
2. ALWAYS turn OFF all the power supply sources
3. ALWAYS disconnect all the cables
4. ALWAYS make sure that all the circuits are discharged.
15.2 How to Prevent Damaging Electrostatic-Sensitive Devices
NOTICE
HOW TO PREVENT DAMAGING ELECTROSTATIC-SENSITIVE DEVICES
The symbol on the left is applied on electrostatic-sensitive devices.
To prevent damaging electrostatic-sensitive devices:
l
Handle the electrostatic-sensitive devices in an ESD Protected Area (EPA)
l
Observe the appropriate antistatic precautions. For example: use a wrist
strap kept in constant contact with bare skin and attached to ground.
99 / 102