Eurotech BoltGATE 20-25, User Manual

Page: 11 / 102

BoltGATE 20-25 User Manual Rev. 1-1 1 Safety Instructions
1.3 How to Prevent Damaging Electrostatic-Sensitive Devices
NOTICE
HOW TO PREVENT DAMAGING ELECTROSTATIC-SENSITIVE DEVICES
The symbol on the left is applied on electrostatic-sensitive devices.
To prevent damaging electrostatic-sensitive devices:
l
Handle the electrostatic-sensitive devices in an ESD Protected Area (EPA)
l
Observe the appropriate antistatic precautions. For example: use a wrist
strap kept in constant contact with bare skin and attached to ground.
1.4 How to Safely Supply Power to the Product
Failure to supply power correctly may create an electric shock hazard, which could result in
personal injury or loss of life, and / or damage the product or other property.
WARNING
THE PRODUCT CAN BE POWERED WITH A HAZARDOUS VOLTAGE.
CONTACT MAY CAUSE ELECTRIC SHOCK OR BURN.
To avoid injuries and safely supply power to the product:
l
Observe all the instructions for safety, installation, and operation
l
Never operate with wet hands
l
Make sure that all the cables used:
o
Are in good condition before using them
o
Meet the product requirements and comply with the relevant
standards and regulations
l
Position cables with care. Do not position cables in places where they
may be trampled or compressed by objects placed on them
l
Make sure that the power-points and plugs are in good condition before
using them
l
Do not overload the power-points and plugs
l
Make sure that the product maintains a proper grounding connection
l
Use a power supply that meets the product requirements and complies
with the relevant standards and regulations. In case of uncertainties about
the required power supply, contact the Eurotech Technical Support Team
(for more information see
"How to Receive Technical Assistance" on
page 13 )
l
Connect power after the installation of the system has been completed
l
Never connect or disconnect the cables with the system or the external
apparatus switched ON
1.5 Caution: Product's Surfaces may Become Hot
Depending on the operating environment temperature, product's surfaces may become hot, creating a burn
hazard.
Always allow the product's surfaces to cool before touching them .
11 / 102