EUROSTER 2006TXRX
–
INSTALLATION AND OPERATION MANUAL
6
6.6.
RESTORING FACTORY SETTINGS
a.
Press simultaneously HOLD and buttons and while holding them press RESET.
b.
Release all buttons.
c.
Press the HOLD button twice and press RESET again.
Factory settings
Default temperatures:
Heating mode
20.4°C
16.2°C
Air-conditioning mode
22.0°C
25°C
Default time ranges:
Monday
–
Friday
6.00 a.m. to 10.00 p.m.
10.00 p.m. to 6.00 a.m.
Saturday
–
Sunday
6.30 a.m. to 10.30 p.m.
10.30 p.m. to 6:30 a.m.
6.7.
SWITCHING OFF THE PROGRAM (operation with constant setting) / HOLD
a.
Set the knob in the START position.
b.
To switch off the program and set the constant operating temperature press HOLD.
“Temp Set” (temperature setting) and “Hold” (program switched off) will be displayed.
c.
Use and buttons to set the desired temperature.
d.
The display will flash for approx. 8 sec. upon the selection of the desired temperature
and then it will show the current room temperature. The thermostat starts operating in
the constant setting mode. From this moment, the thermostat maintains a constant
temperature, set by the user, regardless of the programs.
e.
To restore operation according to the program, press HOLD.
6.8.
5
°C FROST PROTECTION SETTING
a.
Set the knob in the START position.
b.
Press HOLD and hold it for 5 sec.
“
A-
F”
letters appear on the display.
c.
Frost protection function is activated. Regardless of the moment of switching it on, the
function is active until Monday 0.00 a.m.
d.
To switch off the frost protection function and restore operation according to the pro-
gram press HOLD again.
6.9.
TEMPORARY (MANUAL) TEMPERATURE CHANGE
Permits a temporary change of temperature without modifying the stored programs. At the
nearest change of the comfort to economical temperature or in reverse, the thermostat auto-
matically restores operation according to the stored program.
a.
Set the knob in the START position.
b.
Press or button, to show the readout of the current
or
temperature set-
ting.
c.
Use and buttons to set the desired temperature.
d.
After the selection of the desired temperature, the display will flash for approx. 8 sec.
afterward the main screen will be displayed. The thermostat starts the operation ac-
cording to the temporary temperature change. During the operation according to tem-
porary temperature change in a given time range the
or
symbols will disap-
pear from the main display screen; MANUAL inscription will appear instead.
e.
To restore the operation according to the program, turn the knob in either way and re-
turn it to the START position.
