38
Problem
Solution
The quality of the TV sender • Check the antenna connection between the cable tuner and cable
transmitted by the cable
outlet.
tuner is poor:
• Try to improve the quality with the help of the fine tuning function.
• Have the level of the cable signal in the cable outlet checked.
The commands of the
• Make sure that sending diode of your original remote control
remote control of the
points towards the IR receiver (12) of the receiver.
original remote control
• Make sure the batteries of the remote control are not discharged.
are not transmitted:
• Make sure you remote control is ok.
• Make sure the IR transmitter window of the transmitter or IR sending
diodes of the transmitting cable point owards the IR receiver eye of
the device to control.
The commands of the
• Make sure there are no barriers at the transmission path between
remote control of the
the original remote control unit and receiver or between the
original remote control
IR receiver eye of the device to control.
are not transmitted:
• Change the orientation of the probe antenna towards the transmitter
and receiver.
• Switch off other radio-operated devices which transmit in the
frequency response of 433 MHz
Audio reproduction only
• Make sure the balance control at the signal source has not been
via one channel:
adjusted incorrectly.
• Make sure Cinch connectors of audio cables are connected to the
transmitter and receiver connectors properly.
The reproduction is
• Make sure the right outputs of the signal source are connected.
distorted:
The audio inputs or video inputs of the transmitter are overcontrol-
led.
