Instruction Manual MIXPRO 28 CLASSIC EUROPRO pag.25
WARRANTY
1) Within the limits set forth by this warranty, the undersigned manufacturer
undertakes to repair all possible construction damages that may arise during the
warranty period of 12 (twelve) months for a daily use of 8 (eight) working hours.
Such term shall elapse as follows:
a) From the delivery date
(Ref. transport document and sale invoice)
, if the
machine is sold directly to the Customer;
b) From the date given on the “Testing and Commissioning Certificate”, if the
Manufacturer or the Authorized Dealer performs the testing and commissioning of
the machine;
c) From the date of sale
(Ref. transport document and sale invoice)
, if the machine
is sold directly by an Authorized Dealer on a "sale or return" basis; The obligations
resulting from the warranty decay in case of suspension or modification of the
payment terms agreed upon.
2) The warranty decays, if the purchaser does not duly observe the provisions
described in the “Instructions for Use and Maintenance” of the machine.
3) Remain excluded from the warranty: Failures and defects due to the normal tear
of those parts, which for their nature are subject to rapid and fast tear; electric
equipment; failures resulting from the use of tools and accessories not directly
supplied by the manufacturer.
4) In order to be able to exercise the warranty right, the purchaser has to inform
the manufacturer in case of defect detection immediately and, in any case, not later
than 8 (eight) days from the detection date; moreover, it has to allow, if deemed
necessary by the same, the performance of the related inspections and repairing
interventions.
5) The shipment of the faulty part, covered by the warranty, to the manufacturer
for the repairing or replacement of the same is at purchaser's charge. The warranty
obligations, as foreseen by this clause, are deemed fulfilled with the delivery to the
purchaser of the part duly repaired or replaced.
6) During the warranty period set forth by clause 1) labour costs, for the exclusive
duration of the intervention, are at manufacturer’s charge.
Should the repairing or replacement procedures be carried out where the machine
is installed, travel and lodging expenses of the personnel are at purchaser's charge.
7) Remain in any case excluded from the warranty, all faults caused by wrong
manoeuvre, negligence, fortuitous event or in any case all faults imputable to the
user, in person or through third parties, or when the purchaser has carried out
modifications or repairing interventions without the written consent of the
manufacturer, independently from the connection of such modifications or repairing
interventions with the detected faults.
8) It is explicitly agreed upon, that the manufacturer shall not be held responsible
for any liability following any possible damages that the purchasers may suffer
resulting from loss of or diminished production due to possible construction defects
subject to this warranty.
