background image

202201-553-ENG 

User manual - Mixpro 14

P5

IN CASE OF NECESSITY, WE SAVE OURSELVES THE RIGHT TO MAKE ANY USEFUL 

MODIFICATION WITHOUT ADVANCED NOTICE.

2. WARNING (continued) 

2.1. SAFETY (continued)

WORKSPACE

• 

Maintain the workspace clean and clear.

•  Ambient operating temperature must be from 5°C and 35°C.
•  Do not use the equipment in a potentially explosive area.
• 

Do not place any potentially inflammable objects in close proximity to the machine.

• 

Take away every  not qualified person from the working area of the machine, as well as children and 

animals.

•  In case of installation of the machine on scaffolding or a plan above ground level, attach the machine 

to avoid any fall while operating.

•  Do not install the equipment on an inclined surface to avoid the risks of unexpected moves or falls.

HOSES

• 

Always use hoses and connections adapted to the used product (genuine parts), do not try to fix it.

• 

Do not walk on the hoses, do not bend them.

•  Do not use the hoses to pull the machine.

STORAGE

• 

Keep the equipment in a clean and clear area in which the temperature does not 35°C.

Summary of Contents for 30760





















Reviews: