SANDBLASTER 0701AREN10MAS
7
The equipment is fitted with a identification plate that, under any case, can´t be
removed or manipulated.
The identification plate provides the following information:
Manufacturer name
Serial number and manufacturing date.
Main characteristics.
Other compulsory data, according to application regulation.
To make any enquiry to
EUROPE PROJECTION
, related to the equipment, it will
be neccessary to refer to the serial number on the identification plate.
5.4. TECHNICAL FEATURES
The precision sandblaster
t
echnical features are shown in the
table as follows:
0701AREN30MAS
Weight
31,5 kg
Tank capacity
30 l.
Min. working pressure
2 kg/cm
2
Max. working pressure
6 kg/cm
2
Optimal working
pressure
4
– 5,5 kg/cm
2
Required air flow rate
(compressor)
250
– 450 l./min. (Boquilla
2)
350
– 600 l./min. (Boquilla
2,5)
700
– 1000 l./min. (Boquilla
3)
1200
– 1400 l./min.(Boquilla
4)
Safety pressure
6 kg/cm
2
Air inlet connection
CR 3/8 / Racor Expres Din 3489
Working temperatura
de 0 a 50º C
Tip material
Carburo de tungsteno
Size
500x430x940 mm (with carriage
handle)
Table 3
5.5. REGULATION
The precision sandblaster has been designed, manufactured, inspected, tested and
commercialized, under the compliance of the following regulation:
EUROPEAN DIRECTIVE
97/23/CE
Relative to pressure equipments
HARMONIZED EUROPEAN REGULATION
EN 13445-1:2002
Pressure tank not subjected to flame action. General issues.
EN 13445-2:2002
Pressure tank not subjected to flame action. Materials
EN 13445-3:2002
Pressure tank not subjected to flame action. Design
EN 13445-4:2002
Pressure tank not subjected to flame action. Fabrication
EN 13445-5:2002
Pressure tank not subjected to flame action. Inspection and testing
Table 4
