EUROPRO 0701AREN30MAS, User Manual

Page: 5 / 20

SANDBLASTER 0701AREN10MAS
5

Paper and adhesive removing

Swimming pool stripping

Graffiti removing

Concrete cleaning and fitting

Plastic cleaning

Paving and flooring mark removing

Metallic surfaces preparation

Tank and metallic container clearing and stripping
This sansblaster allows us the application of the following types of abrasives: corindon,
metallic grain, glass, aluminium silicate, garnet, calcium carbonate and silica sand (grit).
Next, it is attached a table which will help the end user to choose the abrasive size
according to tip diameter.

Tip (mm)
Abrasive Granule Diam. (mm)
Minimum Maximum
2,0 0,25 0,40
2,5 0,25 0,50
3,0 0,25 0,60
4,0 0,25 1,00
Table 1
The reference of the precision sandblaster model acquired is
0701AREN10
.
5.2. MAIN COMPONENTS
Main components in the equipment are here shown graphically and listed.
Posit. Denomination
1 Tank with wheels
2 Top
3 Product inlet
4 Regulation box and system
5 Working pressure regulador
6 Abrasive product outlet
7 Product outlet flow rate regulator
8 Product hose
9 Remote control circuit (pneumatic)
10 Safety valve
11 Air inlet to equipment
12 Gun
13 Carriage handle
14 Handle clamp
15 Handle clamp housing
16 Air inlet to tank
17 Cap
18 Purifier filter