18
Product Operation:
The appliance is operated by the
e
-
smart
App, the main standby power
switch to the Halo product is located to the right of the heater outlet,
which is marked with a light bulb image, to activate the product, this
switch must be switch to the
“
ON
”
position.
The first time the halo product is activated both the illumination and
heater will function, to switch the heater
“
OFF
”
simply reduce the Room
Temperature down to 10 degrees on the App control.
•
isolate from the mains power supply.
•
Leave product to cool.
•
After a suitable cooling down period, remove the obstruction if obstructed,
and check installation.
•
After 10 minutes the thermo switch (cut
-
out) in the heater will reset.
Please note that both the effect fan and heater fan omit a low decibel noise,
both of which are normal operating characteristics.
Heater unit cut
-
out)
(This is a safety feature, to safe guard against further
damage to the product).
If the airflow is restricted the heater will automatically turn off. This is can
occur due to incorrect installation or obstruction.
To reset the heater function:
