GB
16
D4
E4
START
COOKING
STOP
Change of program parameters
You may change the parameters of a program cooking phase at any time. Enter
into the program menu by pushing the button
; select the recipe and the
phase you want to modify. Then, you may proceed to modify the parameters
with the relative knob.
To memorize the new parameters you have to push
until it appears the
notice “ME M” on display
.
E4
E4
D4
During cooking it is also possible, at any time, to edit the parameters of the phase
underway.
If some changes are made, when the cycle is over, hold down knob E4 until text
“ME M” appears on display D4.
•Intervention or failure of the safety thermostat.
•Chamber probe open or short-circuited.
•Error or failure of electronic power board.
•
.
Signal of “door open
•Core temperature probe open or short-circuited .
•Error on cooking parameter settings.
•
.
High mother-board temperature
Possible causes
ERR1
ERR4
ERR5
ERR6
ERR7
ERR8
ERR13
WARNING SIGNALS
The oven has some allarm and they stop or not the working of the oven. This allarm are always combined
with an acoustic signal.
RESET GAS (in gas verions only)
In the gas oven models, if the alarm appears “
”, press the knob
to
unlock the heating control unit.
If the problem occurs again after reset with the reset key, please consult table
“Troubleshooting” or contact the customer service.
reset
E1
E1
D1
