GB
13
P4
E2
D2
E3
D3
Cooking time
Fan speed
When display
and the led that indicate the knob
blink, you can choose
your desired
temperature's valor. To set the value of the cooking time it is necessary to rotate
the knob
and push to confirm it. After 10 seconds this parameter will be
automatically saved if no further action will be executed. The value can be
change in each moment by pushing and rotating the knob
. It is possible to
insert a time value up to 9 hours and 59 minutes as well as the infinity mode
(“Inf” on the display).
During cooking, on the display appears a countdown of the chosen pre-set time.
At the end of cooking appears a blinking notice on the display and you can hear
also an
intermittent beep alarm. To stop the beep you have to push the button or the
knob.
Display
shows the humidification's level parameters during the cooking
cycle. When the display is flashing you can set up the desired value on a scale
from 10% to 100%.
If you don't set up any value it appears on the display the notice “PUSH” that
indicates the possibility to insert some steam “manually” inside the cooking
chamber. To make this operation you have to push the knob
.
If you wish to change the setting to mixed or steam mode, you can set the new
values by rotating the knob
and confirm them by pushing it.
You can change the humidification values at any time during the cooking cycle.
On the right side of the display
you can see a graduate led scale (3 steps) of
the oven's speed fan.
When the marks on the scale blink, you can change the parameter turning the
knob
and choose the desired value, respectively from maximum (up) to
middle and minimum (down) fan speed.
To confirm this parameter you have to push another time the knob
or the
button
, waiting for 10 seconds without doing any further action
D2
E2
E2
E2
D3
E3
E3
D3
E3
E3
P4
.
Umidification & steam
