9
After Sales Support
(AU) 1300 886 649 (NZ) 0800 836 761 | [email protected]
The Controls
Heat Selection Switch
This switch has five settings, which are explained below. Use it to select the
desired heat level.
OFF
All heating elements are switched off and the
heater stops operating.
•
One heating element
is turned on for
600W heat output.
••
Two
heating elements
are turned on for
1200W heat output.
•
••
Three heating elements
are turned on for
1800W heat output.
••
••
All four heating elements
are turned on for 2400W heat output.
Thermostat Control
The thermostat control can be set from low to high
when at least 1800W heat
output has been selected (settings or ).
•
Turn the control from low to high while heat
setting is selected, or heat setting for
most warmth.
•
Using the thermostat control automatically
turns off the third and fourth heating elements
(setting or ) until the room temperature
has dropped, then they will come on again
automatically until the room has warmed up.
IMPORTANT:
The first two elements will remain
on until the heat selection switch is turned to
the
OFF
position.
•
Remember that the thermostat control only functions when either three or
all four elements are on.
Heat Selection Switch
Instructions (Cont.)
Thermostat Control
